Epcon Designs & Builds Large Capacity Recuperative Thermal Oxidizer

Epcon, Conroe, Texas, designed and built this large capacity Recuperative Thermal Oxidizer for a 55-gallon steel drum manufacturing operation. This system consists of Recuperative Oxidizer with primary and secondary heat recovery and stainless-steel insulated ductwork to and from various ovens and sources of emissions. The entire system was built, shipped in components, installed, and commissioned by Epcon personnel. This is another feather in Epcon’s hat for a repeat customer.

For more information, Visit https://epconlp.com

See the featured article on https://www.modernmetals.com/item/15997-epcon-designs-and-builds-large-capacity-recuperative-thermal-oxidizer.html

 

Comments

Post a Comment

Popular posts from this blog

Aluminum Processing Industrial Equipment

Image
Aluminum Industry Overview Epcon has a long history of providing process and environmental compliance technology solutions to the Aluminum industry. Up and down the value chain, Epcon has delivered innovative solutions for primary and Secondary metal processing , Scrap metal recycling, Aluminum coil/sheet coating, Cast, Forged and Extruded Aluminum Parts Heat Treatment as well as Aluminum Parts Coating applications. Our experience team handles every aluminum application from anodizing, burn out processing, to normalizing ingot logs and coil bundles. Epcon is a leading provider of proven Thermal Oxidation , Thermal Processing (Thermal Deoiling, Ovens & Furnaces) and Finishing Systems to some of the world’s leading Producers of Aluminum Materials and Products.  Having worked with some of the largest producers in the aluminum Industry, Epcon is a trusted supplier of lasting equipment, custom engineered to be the cost effective, environmentally sound solution on the mark...
Read more

Afterburner with Quench & Scrubber for Petrochemical Operations

Image
The Challenge A leader in Latin America’s Chemical and  Petrochemical Industry  needed equipment to oxidize Hydrogen Sulphide and removal of SO 2 /SO 3 . The chemical plant generated large quantities of exhaust enriched with H 2 S, water vapor and air, which were costing the facility exorbitant amounts to properly dispose of . The company went out seeking the technical solutions and went to several  manufacturers  to locate the best possible technology. The Solution  Epcon has built several systems for Chemical companies for similar applications for removal of H 2 S and acid gases and used their prior experience to asses the appropriate technology. Epcon evaluated several technologies and decided on an Afterburner with Quench and Scrubber as the best solution for this application. Other types of oxidizers can be used, but based on their small flow and high heat release from VOC’s we chose an Afterburner. Epcon also designed and installed Quench ...
Read more

Coil Coating Line with Regenerative Thermal Oxidizer and Multistage Heat Recovery

Image
The Challenge A Coil Coating operation utilized an old direct-fired afterburner and a portion of the exhausts gas to heat a 100’ long curing oven, operating at line speeds up to 700ft/min The Solution Evaluating the appropriate oxidation system for a specific process stream is more challenging and requires in depth analysis of the specific process gas and operating parameters, as there are many configurations to choose from. A Direct Fired Afterburner, sometimes called an incinerator, is the most elementary system, as it contains no heat recovery system. Ideal for high VOC levels and fluctuating operating conditions. Thermal oxidizers are more sophisticated systems with a variety of heat recovery systems and configurations, typically used for larger process air flows.  Regenerative system, which uses media to absorb and transfer heat, was selected for this application.  In addition they are not steady-state, Instead they rely on a cycling gas, which flows ...
Read more